Key Features
According to the official website, the key specifications and features of the Panoptix PS70 are as follows:
• Transducer Type: Stainless steel through-hull (through-hull) transducer.
• Sonar Technology: Utilizes Garmin RapidReturn™ SSMB sonar technology, which simultaneously transmits multiple sound waves through the water column to provide real-time imagery.
• Maximum Detection Depth: Up to 300 meters (approximately 1,000 feet).
• Beamwidth: Approximately 120° × 8°, capable of scanning a wide area.
• Output Power: 800 watts.
• Mounting: Through-hull mounting, with an optional fairing (available for purchase) to support mounting at a horizontal angle of 0 to 20 degrees.
• Waterproof & Environmental Specifications: IPX7 rating, operating temperature range 0°C to 40°C.
• Cable Length: 8 feet + 40-foot extension cable.
• Connection Interface: Supports Garmin Marine Network port connection.
________________________________________
Applications
This device is suitable for:
• Deep-sea or deeper-water fishing/boating, as it offers real-time scanning capabilities up to 300 meters.
• Users who want to simultaneously observe fish and underwater structure below, to the sides, and from multiple angles (supports wide-beam, triple-beam, and 3D modes).
• Installation on vessels capable of through-the-hull transducer installation (requires the hull to support this type of transducer).
________________________________________
Purchasing and Installation Notes
• Hull Structure: Because this is a through-the-hull transducer, before installation, confirm that the hull's through-the-hull position is suitable and that the stainless steel transducer body can be properly installed. If the hull cannot accommodate through-the-hull installation, it may not be suitable.
• Mounting Angle: The official website states that the optional fairing supports mounting at a 0-20° angle. Improper mounting angles may affect image stabilization and sonar performance.
• Power/Power Supply: Input voltage is 10-35 V, consuming approximately 35 W. Ensure your boat's power supply system and fuse (7.5 A) are properly configured.
• Cable Length and Deployment: The cable includes an 8-foot + 40-foot extension cable. During installation, consider the wiring and protection from the transducer to the display unit (fish finder).
• Compatibility: The transducer must be connected to a device that supports the Garmin Marine Network. Confirm that your fish finder or multifunction display (MFD) is compatible.
• Environment and Maintenance: Although the transducer is stainless steel, it is intended for use in saltwater environments. Regular flushing, seal inspection, and protection from saltwater and debris are recommended.
